Floral Transfer Sheet For Polymer Clay



Welcome to Clay Dough Cutters! We are delighted that you found our store.

The Transfer Paper measures approximately 5" x 4" .

To ensure successful transfer of the design onto clay, please carefully follow the instructions below. Failure to do so may result in distortion or loss of the design.


Condition the clay and roll it onto a tile surface, ensuring it is firmly stuck using an acrylic roller.
Place the transfer paper with the colored/printed side facing down onto the clay slab. Roll over the transfer paper gently with the acrylic roller to ensure it is completely stuck to the clay without any air bubbles or lifting corners.


Hold the tile with the clay slab under low-pressure running water from your sink faucet.
The paper will begin to dissolve, and you should gently rub away the remaining paper with your fingers until a smooth texture is achieved. Avoid applying too much pressure as this may distort the design.

Allow the clay slab to dry completely before cutting. Do not cure the clay until it is dry. Use a paper towel to gently dab the clay slab to remove excess water, but do not apply pressure.
Once the clay slab is dry, cut and bake it as usual. Please note that colors may slightly change during baking, and we recommend using white or light-colored clay for the most accurate results.

To increase the durability of the transferred design, we recommend sealing your finished piece with resin for a shiny finish or any matte sealant for a matte finish.

Please note that we do not offer refunds or exchanges for this product but if there are damages or breakage upon receipt of the item, please inform us. If you require a different size, please send us a message.

Size Guide

-Each cutters size is determined by "longest dimension" of the cutter.

-The "longest dimension" is roughly the length of the diameter of the smallest circle that will fully enclose the cutter.

-The calculation for the size of the cutter is for the cutting edge only and does not include the thicker base.

-If you have any questions about sizing, please do not hesitate to message us at claydoughcutters@gmail.com.

Frequently Asked Questions

Question: What is the proper way to care for my cutters?

Answer: To ensure proper care of your cutters, please avoid bending the cutters as the beveled cutting edge is thin. Please avoid placing any objects on top of the cutter and press gently while cutting polymer clay. After use, gently wash the cutters with soap and water, and a soft brush if needed. For storage, keep the cutters in a cool and dry place, away from direct sunlight or heat. Please refrain from washing the cutters in a dishwasher as the heat may permanently distort the cutter shape.

Question: How long will it take for my order to ship?

Answer: Processing time for orders vary as every cutter is made to order. Usually processing time is between 1-3 business days, however, during period of high order volumes – orders may take up to 5 business days to process.

Question: What if my package is marked delivered but not received?

Answer: Unfortunately, once the package is dispatched, it is beyond our control, and you will need to reach out to your local post office for further assistance. Please note that we are not responsible for any lost or stolen products during shipping.

Question: How do I prevent clay from sticking inside cutters?

Answer: To prevent clay from sticking to your cutter, we recommend working on a flat glossy ceramic tile or glass sheet. Gently press the cutter into the clay, wiggle it slightly, and lift it to remove. For small or detailed cutters, we recommend using corn starch to prevent sticking. It is best to apply a light layer of corn starch to your clay surface and/or to the cutter itself before use. Finally, use a soft brush to remove any excess corn starch.

Question: My cutters arrived damaged, what should I do?

Answer: Please check the content of your package carefully upon delivery of your parcel. If any of the items are damaged during transit please contact us within 24 hour of delivery and we will try our best to resolve any issues.

Returns & Exchanges

-We do not accept returns or exchanges. If there is an issue with your order, please contact us at claydoughcutters@gmail.com and we will try our best to resolve any issues.